Fetching 3D model...
Loosen 5 lug nuts (21mm) while car is on ground, then jack up and remove wheel.
21mm Socket Jack + StandsRemove two 17mm caliper bracket bolts. Hang caliper with wire — never let it dangle by the brake line.
17mm Socket Wire/BungeeRemove the rotor retaining screw (Phillips) if present. Tap with a rubber mallet if the rotor is stuck.
Phillips Screwdriver Rubber MalletRemove 10mm bolt securing ABS sensor wire. Unplug the connector carefully — sensors are fragile.
10mm SocketRemove four 14mm hub-to-knuckle bolts from the back side. Hub assembly pulls straight out.
14mm Socket Breaker BarPlace new hub assembly into knuckle. Hand-thread the four 14mm bolts, then torque to 65 ft-lbs in a star pattern.
Torque Wrench 65 ft-lbsReinstall ABS sensor (10mm, 9 ft-lbs), rotor, and caliper bracket (17mm, 79 ft-lbs).
Torque WrenchMount wheel and hand-tighten lug nuts. Lower car, then final torque lugs to 89 ft-lbs in a star pattern. Re-torque after 50 miles.
89 ft-lbsOEM: SU003-00782 | Aftermarket: 513352
RockAuto — Hub Assembly ~$45-80 Amazon — 513352 Hub ~$40-65 O'Reilly — BCA Hub ~$55-90 PartsGeek — Hub Assembly ~$35-70